DPI
Electronic differential pressure switch and transmitter
The DPI series electronic pressure measuring devices are engineered for building automation in HVAC/R industry. The most technologically advanced and versatile electronic differential pressure switches on the market, combining up to two relay outputs and 0–10 V output options.
The DPI includes the following field selectable features: • Configurable switching point: Open on rise or fall in pressure • Hysteresis of setpoint • Measurement units (Pa, kPa, mmWC, inWC, mbar) • Measurement range (4 ranges per model) • Output signal (0−10 V, NO/NC) • Span and zero point calibration
DPT-2W
Multi-range differential pressure transmitters with 2-wire configuration
DPT-2W series differential pressure transmitters are engineered for building automation in the HVAC/R industry. The DPT-2W measure static and differential pressure and they have a field selectable range.
DPT-2W series devices include: • 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper • Pressure measurement in Pa • 4-20 mA 2-wire current loop configuration
DPT-Dual
Field adjustable, multi-range differential pressure transmitters with two pressure sensors for air
DPT-Dual series differential pressure transmitters are engineered for building automation in the HVAC/R industry. DPT-Dual is a technologically advanced transmitter measuring static and differential pressure from two different points, with field selectable units, range and output, all in a single device.
DPT-Dual series devices include:
• Multiple measurement units, field selectable via jumper, including: inWC, mmWC, Pa, mbar. • 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper.
DPT-DUAL-MOD
Field adjustable differential pressure transmitter with two pressure sensors for air and an Input terminal for two analog inputs for external signal conversion into Modbus.
DPT-Dual-MOD combines two differential pressure transmitters into one device. It offers a possibility to measure pressure from two different points. It has a Modbus interface and an Input terminal. When using the Input terminal, temperature transmitters can be replaced with temperature sensors. As a result you will save in costs of the devices and in the installation costs. The AHU model that includes an air flow transmitter has been designed especially for ventilation units.
DPT-Dual-MOD series devices include: • Multiple measurement units, field selectable via menu, including: Pa, mbar, inchWC, mmWC and psi. • Input terminal enabling reading of multiple other signals such as temperature or control relays over Modbus
DPT-IO-MOD
Differential pressure transmitter with Modbus communication and Input terminal
The DPT-IO-MOD differential pressure transmitter for air conforms to Modbus over serial line protocol using RTU transmission mode and RS485 interface. The digital output signal is sent over Modbus enabling the DPT-IO-MOD to connect directly to a field communications network.
DPT-IO-MOD requires less wiring than the traditional 3-wire transmitters since multiple devices can be connected on serial line.
The DPT-IO-MOD includes an Input terminal that enables reading of multiple other signals such as temperature or control relays over Modbus. The Input terminal has two input channels designed to accept 0−10 V, NTC10k, Pt1000, Ni1000/(-LG), and BIN IN (potential free contact) signals. For example, DPT-IO-MOD can read values from one differential pressure measurement point and two temperature measurement points. Hence, the DPT-IO-MOD does the work of three transmitters.
DPT-MOD
Multifunctional differential pressure transmitters with air flow measurement and Modbus communication
DPT-MOD is a multifunctional transmitter for measuring volume flow, velocity, and static and differential pressure. The measurements can be read and the configuration done via Modbus communication. DPT-MOD requires less wiring than the traditional 3-wire transmitters because multiple devices can be connected on serial line. DPT-MOD can also be used with several different measurement probes such as FloXact™ or pitot tube, and air dampers.
DPT-MOD series devices include: • Two selectable functions: o Measure and monitor in-duct volume flow, velocity or differential pressure o Measure and monitor air flow across centrifugal fans • Multiple selectable measurement units: o Volume flow: m3/s, m3/h, cfm, l/s o Velocity: m/s, ft/min o Pressure: Pa, inWC, mmWC, kPa, mbar • Modbus communication protocol
DPT-MOD series device options offer: • AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy
DPT-PRIIMA
High accuracy transmitter for demanding applications
DPT-Priima is a high accuracy differential pressure transmitter designed for cleanrooms and other demanding applications. DPT-Priima has a new, extremely accurate sensor and automatic zero point calibration, and optional span point calibration.
DPT-Priima together with SPP (static pressure port) is a complete solution for building envelope measurement.
DPT-R8
DPT-R8 series differential pressure transmitters are engineered for building automation in the HVAC/R industry. The most technologically advanced transmitters on the market measuring static and differential pressure, with field selectable units, range and output, all in a single device.
DPT-R8 series devices include: • Multiple measurement units, field selectable via jumper, including: inWC, mmWC, Pa, mbar. • 8 field selectable measurement ranges, unidirectional or bi-directional, selectable via jumper. • Proportional output options including: voltage (0–10 V / 2-10 V) and current (4–20 mA).
DPT-R8 series device options offer: • AZ (autozero) function for automatic zero point calibration, eliminating the need for periodic manual autozeroing to ensure long term accuracy • Backlit display • Field adjustable span point calibration (i.e. gain)
Differential pressure transmitters